AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 166)

Available Features Enabled by Administrators
160
41-001376-00 Rev 01 – 06.2013
XML Override for a Locked Phone
The 6730i has a feature that allows a locked phone to be overridden when an XML application is sent to the phone. This
feature also allows you to still use programmable keys applicable to the XML application even though the phone is
locked. However, any keys NOT associated with the XML application cannot be used when the phone is locked.
Also, XML Get Requests override the locked feature on the phone so that any programmable key pressed by the user that
initiates a Get Request continues to get sent.
Only a System Administrator can configure the feature of "XML override for a locked phone".
RTP Recording and Simultaneous Playing
The IP Phones now allow for Real-Time Transport Protocol (RTP) recording and simultaneous playing of an audio file via
XML commands created by your Administrator. The RTP and multicast RTP commands allow the phone to send/receive
an RTP stream to/from given multicast/unicast addresses (without involving SIP signalling).
Contact your System Administrator for more information about this feature.
“Hold” Feature Enhancement (for Broadsoft Servers)
The Hold feature allows you to put an active call on “hold,” then retrieve the call later. This enhancement is intended for IP
phones operating with servers that support RFC3264 (for example, Broadsoft). If a server does not support RFC3264,
then the IP phones do not use RFC3264 functionality.
Configurable Save and Delete Keys
There are six function keys on the 6730i phone located to the left of the paper label. Your System Administrator can make
the Save and Delete keys (Keys 5 and 6) programmable keys with the same functions that are available for the other pro-
grammable keys.
By default, the Save key allows you to save entries to the Directory and perform a Save-To from the Callers List. It also
allows you to save speed dial information to a programmable key. You can also use the Save key while using specific XML
applications.
By default, the Delete key allows you to remove entries from the Directory List and Callers List. (Must enter the Directory
or Callers list and select an entry, then press twice to delete entry).
Once the Save and Delete keys are made configurable, you can change the function of the keys using the Aastra Web UI.
Notes:
1. When an RTP stream is being sent with RTP recording and simultaneous playing (mix), the IP Phone LCD displays an
icon with an ‘m’ on top to indicate that a mixed RTP stream is being sent.
2. When RTP stream is being received with RTP recording and simultaneous playing (mix), you can use the volume con-
trols on the IP phone to adjust the volume (increase or decrease) to your specifications.
Important!
If you change the functions of the Save and Delete keys, and then an Administrator locks Keys 5 and 6, the functions
are automatically set back to the default settings of “Save “and “Delete”