AASTRA 6730i (Version 3.2) User Guide EN - Manual (Page 137)

Managing Calls
41-001376-00 Rev 01 – 06.2013
131
CFWD in Phone Mode
1. Use the RIGHT and LEFT arrow keys to scroll through each account.
In the above example, Screenname1, Screenname2, and Screenname3, are three accounts configured on the phone.
All three accounts have CFWD enabled as indicated by the “CFWD All” message.
Note:
In ”Phone” mode, when you change the call forward configuration for an account, the change applies to all
accounts.
2. Press the Call Forward key. The Call Forward menu displays. Use the UP and DOWN arrow keys to scroll through
each state type.
3. In the above example, the account has CFWD All and CFWD NoAns enabled as indicated by a check mark (

). The
CFWD Busy setting is enabled but no call forward phone number is configured as indicated by a
!
.
4. Select a state using the UP and DOWN arrow keys.
You can enable/disable a specific account on the phone with any or all of the following states. However, the config-
uration you set will apply to all accounts on the phone.
• All - Enables CFWD All on the phone and forwards all incoming calls to the specified number.
• Busy - Enables CFWD Busy on the phone and forwards incoming calls to a specified number if DND has been
enabled OR if the phone is currently engaged in another call.
• No Answer - Enables CFWD NoAns on the phone and forwards incoming calls to a specified number if the call
has not been answered for the specified number of rings.
Note:
If CFWD All AND CFWD Busy AND CFWD NoAns are all enabled (and/or if the account has DND enabled), the CFWD
All settings take precedence over CFWD Busy and CFWD NoAns.
You can also use the following keys if required:
• All Off - Disables all CFWD states for the phone.
• All On - Enables all CFWD states for the phone.
Note:
In “Phone” mode, the initial configuration you set for an account applies to all the accounts on the phone.
Screenname1
CFWD All
Jan 1 12:96
1 Screenname2
Jan 1 12:96
2 Screenname3
Jan 1 12:96
3
CFWD All CFWD All
Cfwd Mode
Done
1. All
Change
Cfwd Mode
Done
2. Busy
Change
Cfwd Mode
Done
3. NoAns
Change
Cfwd Mode
Done
4. All Off
Set
Cfwd Mode
Done
5. All On
Set
!
Indicates
Indicates
CFWD ALL
CFWD NoAns
Indicates
no CFWD
phone number
configured for
enabled
Busy
enabled