AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 46)

Basic Functions
44
Note
When you make a setting and press the OK softkey, the new value is saved (i.e.
saved as a menu entry, please refer to “Audio” Menu starting on page 109).
Switch Ringer On/Off
If you wish to be sure you are not disturbed (e.g. during a meeting) you can switch off
the ringer. Incoming calls are then signalled silently by vibration instead of the audio
signal (if activated, see page 111 – not available on the Aastra 610d).
Switch off
When idle, press the
star key longer – the symbol appears on the display.
Switch on
When idle, press the
star key longer once again – and the symbol appears on
the display.
Switch Off Ringer When Called
If you wish to switch off the ringer for a current incoming call, press the key or the
softkey. As long as the caller has not hung up yet, you can still accept the call.
Vibra Call (Aastra 620d/630d Only)
You can activate/deactivate the vibration alarms in the > Audio > Ringer
settings > Device > Vibra call menu (see page 111).
Signalling Wake-up Time or an Appointment
When there is a wake-up call or appointment call (see page 89) the ringing tone is
activated for 1 minute and the display shows an event text, if saved. You can com-
pletely terminate the call using the Stop softkey. If you press the Snooze softkey, the
ringing tone is interrupted for 5 minutes and then switched on again. You can also
press the
end key or the C-key instead of the Snooze softkey.