AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 131)

The Device Menu
129
Time control: In the Aastra 800 / OpenCom 100 communications system several time
groups can be configured. Depending on the activated time group, incoming
calls are signalled on different terminals.
Automatic: Activates automatic time control. The configured time groups then
switch automatically according to the timetable configured by the
system administrator. This setting remains active until one of the
existing time groups is set manually.
Time group: The system administrator can configure up to 10 time groups. The
time groups are either numbered (default setting) or they have been
given a name by the system administrator. You can manually select a
specific time group; the automatic time control is then deactivated.
Note: Any “MSN” call diversion always remains in effect – regardless of the cur-
rently active time group.
Date / Time: The date and time are taken over from the exchange on the first external
outgoing call. If this information is not transmitted by your network operator,
you can set the date and time here yourself.
“Settings” Menu
Key lock: Press the Ok softkey to activate the key lock (please refer to page 42).
Key programming: You can programme the softkeys (except Esc ), the side keys and
the hotkey (not the Aastra 610d). After calling the Key programming feature,
press the key you wish to programme. A pick-list of programmable functions
appears. This list is the same displayed when a programmable key is pressed
longer when idle. See page 137 for a description of how to proceed.
Aastra 630d: This is where you set the SOS key function. After calling up the
menu press the SOS key and select …
SOS call: with confirmation: After a short key press on the SOS key in an
emergency a prompt is displayed. This prompt avoids to initiate the SOS
call by mistake. After a long key press the SOS number is dialled directly.
SOS call: After a key press on the SOS key in an emergency the SOS number is
dialled directly.
User name: This is where you can enter a name for your mobile unit, shown on the
display when idle.