AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 135)

The Device Menu
133
within range for ca. 30 sec. Select an entry, press the Ok softkey and
enter the headset PIN. “Pairing” is started.
If you wish to change the name or delete a Bluetooth headset, select ...
Edit: Changes the headset name.
Delete: The subscription data for the corresponding headset is deleted
after a confirmation prompt.
“Security” Menu
You have to enter the device PIN to open the Security menu. The default is “0000” (4
digits of 0 (zero)).
Phone lock: The telephone is locked. Now only incoming calls can be accepted. A pro-
grammed emergency call key or the SOS key can still be used on the
Aastra 630d. To remove the telephone lock, see page 42.
Change PIN: Change the device PIN for the Security menu. Enter the new PIN and
then re-enter the new PIN once more.
SOS call
SOS number: Enter the call number for an emergency call. This SOS emer-
gency call number is dialled when the SOS key is pressed (Aastra 630d),
when a programmed emergency call key is pressed or via the Alarm
sensor (Aastra 630d, if no Alarm number is programmed). If the SOS
emergency call number is predefined by the system, this menu entry
does not appear.
SOS key: you can define what the SOS key does (Aastra 630d). Either the emer-
gency call number is dialled immediately (SOS call) or just after being
pressed again (SOS call: with confirmation).
Alarm sensor: (Aastra 630d only) Please read the description of the alarm sensor on
page 51 before making configurations.
Alarm number: If the SOS emergency call number is predefined by the system,
this menu entry does not appear.
Enter the alarm call number to be dialled when there is a sensor alarm.
OpenCom 100 / Aastra 800 systems only: You can prefix the call
number with the R key function (enquiry) by pressing the
hash key 3