AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 138)

The Device Menu
136
Headset: Headset operation parameters are pre-defined in this profile.
Meeting: Parameters for using the mobile unit during a call are pre-defined in
this profile.
Loud: This profile has parameters for usage in an especially loud environment.
: This profile can be used as you please.
Settings: Select one of the profiles to make changes.
Profile name: Change the profile name if necessary.
Ringer volume: Set your preferred ringer volume (Increasing, levels 1...7).
Ringer device: Select where and with what you wish ring tones to be made
(loudspeaker, headset, vibrator).
Ringer type: Select whether a ring tone sounds once or repeatedly.
Key click: Switch key click on or off.
Noise detection: Switch automatic noise detection for a louder ringer on or
off.
Loud environment: Switch this function on to have voice quality adjusted in a
loud environment.
Silent charging: Switch the Silent charging function on or off (see also
page 131).
Incoming call: Switch LED display for an incoming call on or off.
“Door opener” Menu Entry
This menu entry is only available when your mobile unit is checked into the
Aastra 800 / OpenCom 100 communications system, see “System” Menu starting on
page 112.
Door opener: You activate the door opener.