AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 110)

The Device Menu
108
“Time/Alarms” Menu
Use the and navigation keys to adjust input position for all menu settings and the
and keys to change the values.
Date/Time
Time: displays the time currently configured on the mobile unit
Edit: Changes time setting.
Date: displays the time currently configured on the mobile unit
Edit: Changes date setting.
Note: If time and date are transmitted by the communications system, you
cannot make this setting.
Appointment: Displays appointment list. You can enter and activate up to 3 appoint-
ments. Select an entry from the list and press the Ok softkey.
Status: Switching the appointment On or switching it Off.
Edit: Switching appointment on or off.
Time: Displays time set for the appointment.
Edit: Changes time setting.
Date: Displays date set for the appointment.
Edit: Changes date setting
Text: Displays text entered for the appointment.
Edit: Change/re-enter the text (32 characters max.).
Note: If the ringer is switched off (see page 111), there is no acoustical signal
for the appointment set. Appointments can also be programmed in the
System menu (see page 121).
An appointment call which is already being signalled can be interrupted for
5 minutes at a time, as described on page 44 with Snooze. When opening an
appointment which has been paused, Stop (to switch off ) and Snooze (to con-
tinue interrupting the signal) appear.
Alarm clock: Displays the list of alarm clocks. You can enter and activate up to 3
appointments.
Status: Switching the alarm clock On or switching it Off.
Edit: You have the choice between Once (at the next possible time),
Daily (recurring daily) and Off.