AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 140)

Key Programming
138
Programmable Functions
Press the respective key longer or use the > Settings > Key programming menu
(see page 129).
If you press the softkey while programming keys, the standard factory setting
value of the key is displayed. You can confirm them via OK.
The following selection is offered:
No function The key is available.
VIP list A call number list (6 entries max.) is assigned
to the key.
The VIP-List is assigned to the hotkey as the
default setting. You have to programme the
key first before you can assign call numbers
to the VIP-List. After calling it the first time,
enter the corresponding call number and
name so the list becomes available to you.
Alarm clock Initial programming of alarm clock settings is
done.
Appointment Initial programming of appointment settings
is done.
Profile The selection of profiles is presented.
Info The info menu (caller list, redial, …) can be
programmed.
New Info If new messages or, e.g. new calls have
arrived in the call list, the list entries are
directly retrieved with the programmed key.
Caller list Here is the caller list.
Redial list Here is the redial list.
Voice box Here is the list of voicebox messages.