Line of softkeys and idle display, Functions – AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN User Manual
Page 31
Functions
29
Line of Softkeys and Idle Display
The three keys below the display are called softkeys. The functions assigned to the
keys are shown in the lowest line of the display. The key function automatically
changes depending on the respective operation state of the mobile unit.
The following symbols appear in the softkey line in the default condition of the
mobile unit.
you have received new short messages
you have short messages which have been read
ringer switched off
call key pressed
call forwarding “immediately” is activated
call protection active
alarm sensor active (Aastra 630d only)
Enables selection from the redial list.
Navigation menu. This is for calling a pick-list of frequently used
features. These are:
•
phone book of the Aastra 800 / OpenCom 100 communica-
tions system (central phone book / system directory)
•
phone book of the mobile unit (personal phone book /
private directory)
•
info lists (caller list, voicebox (if available), redial)
•
profiles
The navigation keys are also assigned with these functions.
•
short key press: You open the device menu of the mobile
unit (see page 100).
•
long key press: You open the system menu / main menu of
the communications system (see page 113).