Yamaha mcx-1000 - Manual (Page 93)

Controlling MusicCAST clients
93
Controlling MusicCAST clients
Start playback on any MusicCAST client connected to the MusicCAST server.
1 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
2 Use / to move the cursor to “Client
Playback” and press SELECT.
The Client Playback screen appears on the on-screen display.
The on-screen display can display details for up to 5
MusicCAST clients simultaneously. Use
/ to view the
details of other MusicCAST clients.
3 Use / to move the cursor to the MusicCAST
client you wish to operate and press SELECT.
4 Select a playback method.
Use the same methods as described on pages 30-56 of this
manual to select a song for playback.
Lock and unlock MusicCAST clients so that it is not possible to operate the MusicCAST client from its front panel
or remote control.
1 Carry out the procedure described on page 92
to display the Client Playback screen.
2 Use / to the to move the cursor to the
MusicCAST client you want to lock or unlock.
MusicCAST client playback from the MusicCAST server
Locking and unlocking MusicCAST clients