Yamaha mcx-1000 - Manual (Page 124)

System setup
124
Turn Auto Levelling function on or off. Auto Levelling automatically produces or increases the base volume of
playback to a theoretical average in order to eliminate any large differences in the volume at which songs were
recorded.
1 Follow the procedure described on page 117
“Opening the system setting screens” to
display the System Setup screen.
2 Use / to move the cursor to “Auto Level
Control” and press SELECT.
The Auto Level Control screen appears on the on-screen
display.
3 Place a check in the checkbox labelled “Adjust
the volume level automatically” to turn auto
Levelling on.
4 When you finish setting the parameters
described in the previous step, move the cursor
to “OK” and press SELECT.
The display returns to the System Setup screen.
Select “Cancel” to return to the System Setup screen without
changing any settings.
HINT HINT
Press BACK to return to the previous screen.
NOTE
• The auto Levelling function uses a theoretical average base
volume to eliminate large differences in volume between
songs, and may produce unsatisfactory results if you are
listening to tracks with widely varying base volumes such as
light classical and hard rock music in sequence. If you are
not satisfied with the sound the MusicCAST server produces
when the you turn Auto Levelling on, do not use this
function.
• The Auto Leveling function does not affect songs which
have not been encoded to MP3 format, or songs which the
MusicCAST server is currently encoding to MP3 format.
Select the menu page you want to the MusicCAST server to display when you turn it on.
1 Follow the procedure described on page 117
“Opening the system setting screens” to
display the System Setup menu.
2 Use / to move the cursor to “On Screen
Display” and press SELECT.
The On Screen Display screen appears on the on-screen
display.
3 Use / to select the option you want and
press SELECT.
• Open Top Menu
The MusicCAST server displays the Top Menu screen
whenever you turn it on.
• Open the last page displayed
The MusicCAST server displays the last page displayed
whenever you turn it on, with some exceptions such as the
System Setup and Information screens (for these screens the
display returns to the Top Menu screen).
Turning the Auto Levelling function on and off
Setting the screen display