Yamaha mcx-1000 - Manual (Page 122)

System setup
122
Set the parameters for use with an AV receiver connected to the MusicCAST server with an RS-232C cable.
• Check that the MusicCAST server and the AV receiver are
connected correctly.
• You can check that the AV receiver you use is controllable
from the MusicCAST server on page 133.
1 Follow the procedure described on page 117
“Opening the system setting screens” to
display the System Setup screen.
2 Use / to move the cursor to “AV Receiver”
and press SELECT.
The AV Receiver screen appears on the on-screen diaplay.
When the MusicCAST server cannot confirm that it is
connected to an AV receiver, it displays the following message
on the on-screen display.
If this screen appears, check the connections between the
MusicCAST server and the AV receiver, and the AV receiver
brand. The MusicCAST server AV control function only works
correctly when the MusicCAST server is connected to a
YAMAHA AV receiver with an RS-232C cable.
3 Use / to move the cursor to an appropriate
field and press SELECT.
■ Audio connection settings
Set the AV receiver input on the AV receiver connected to
the MusicCAST server.
You must set this parameter, correctly to use the MusicCAST
server to change surround program settings.
Use / / / to select the AV receiver input the
MusicCAST is connected to.
■ Control Settings
Set the AV receiver control functions.
Use the
/ to move the cursor to the option you want to set
and press SELECT to place a check in the checkbox.
• “Synchronize power ON/OFF with the MusicCAST”
The MusicCAST server turns on the AV receiver when you
turn the MusicCAST server on.
• “Change surround program for each genre played”
The MusicCAST server changes to surround effect setting
on the AV receiver each time the playback song changes.
NOTE
Use the / and SELECT to remove the checks from the
checkboxes if you do not wish to use these functions.
Setting AV receiver parameters