Yamaha mcx-1000 - Manual (Page 80)

80
Creating CDs
Use the MusicCAST server to make original CDs containing songs you select from those stored in its
database. You can also use it to duplicate directly any CDs you own. The CD-Rs and CD-RWs produced
by the MusicCAST server can be played in most general-purpose CD player.
Some CD and DVD players cannot play CDs recorded using the MusicCAST server. Consult your CD player manual for further
details.
CD recording song formats
When you store a CD, the MusicCAST server stores both PCM and MP3 versions of the songs from the CD on its
hard disk drive. When recording the songs to a CD-R or CD-RW the MusicCAST server only transfers the PCM
versions of the songs. It then deletes both the PCM and the MP3 versions of the songs from its hard disk drive.
• You cannot record songs which have had their PCM data deleted, or songs for which the MusicCAST server was set not to
record PCM data (see page 121).
• You cannot record songs to a CD-R that already has data recorded on it. If you wish to record songs to a CD-RW that already
has data recorded on it, you must initialize the disk, erasing all data, before recording.
Select songs to record to a CD-R or CD-RW.
1 Press OPEN/CLOSE to open the disc tray.
2 Place a new audio CD-R or CD-RW in the disc
tray.
If you want to reuse a CD-RW, first initialize it using the
procedure described on page 89.
Place the CD in line with the markings on the disc tray, label
side up.
Use only audio CD-R or CD-RWs when recording songs
from your MusicCAST server. The MusicCAST server
cannot record to data CD-R or CD-RWs (refer to page 89
for a detailed explanation).
3 Press OPEN/CLOSE to close the disc tray.
Pushing the disc tray gently causes it to close.
When you load a CD-R or CD-RW, the MusicCAST server
checks the type and capacity of the disc. This procedure takes a
few seconds.
Selecting songs to record from the songs stored in the
MusicCAST server
1, 3 5, 6, 8, 9
4
4
1, 3 5, 6,
8, 9