Yamaha mcx-1000 - Manual (Page 52)

Playback
52
Use the MusicCAST server to listen to MP3 CDs.
1 Press OPEN/CLOSE to open the disc tray.
If there is already a CD in the MusicCAST server, skip directly
to step 4.
2 Place the CD you wish to store in the
MusicCAST server in the disc tray.
Place the CD in the tray label-side up, aligned with the grooves
on the disc tray.
3 Press OPEN/CLOSE to close the disc tray.
When you load a CD, the MusicCAST server reads its type and
volume.
This operation can take a few seconds.
MP3 CD specifications
The MusicCAST server can playback MP3 CDs that
meet the following specifications:
• ISO 9660 level 1 or 2 multisession Joliet/Romeo
format (the MusicCAST server is not packet-write
capable)
• A maximum of eight folder levels
• A maximum of 300 files, with an .MP3 or .mp3
extension
• MPEG-1 layer 3, all bitrates (32 kbps to 320 kbps).
NOTE: For Variable Bit Rate discs, bitrate and/or
time information may not be correctly displayed.
• ID3 tag version 1.1 capable
4 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
5 Use / to move the cursor to “Library” and
press SELECT.
The Library screen appears on the on-screen display.
6 Use / to move the cursor to “CD” and press
SELECT.
The CD screen appears on the on-screen display.
The names of all of the albums on the MP3 CD are displayed.
Listening to MP3 CDs