Yamaha mcx-1000 - Manual (Page 48)

Playback
48
You can use the MusicCAST server as a standard CD player to listen to CDs.
1 Press OPEN/CLOSE to open the disc tray.
If there is already a CD in the MusicCAST server, skip directly
to step 4.
2 Place the CD in the MusicCAST server in the
disc tray.
Place the CD in the tray label-side up, aligned with the grooves
on the disc tray.
3 Press OPEN/CLOSE to close the disc tray.
When you load a CD, the MusicCAST server reads the type
and volume and looks for the names of the songs, album, artist,
and genre in its built-in Gracenote CDDB database.
This operation can take a few seconds.
4 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
5 Use / to move the cursor to “Library” and
press SELECT.
The Library screen appears on the on-screen display.
6 Use / to move the cursor to “CD”and press
SELECT.
While the MusicCAST server is reading information from the
CD, the message “Reading data” appears on the on-screen
display. The CD screen appears on the on-screen display.
The names of all of the songs on the CD are displayed.
See page 23 for a detailed explanation of how the MusicCAST
server reads information from discs.
The above information is not displayed for some discs, or
when you set the MusicCAST server not to use the Gracenote
CDDB database (see page 119 for a move detailed
explanation).
Using the MusicCAST server to listen to CDs