Appendix 138 – Yamaha mcx-1000 User Manual
Page 138
Appendix
138
You cannot start playback on the
MCX-A10.
Auto Configuration has not finished.
→ Carry out the Auto Configuration
process.
The network settings are incorrect.
→ Check the network settings.
The MCX-1000 is not turned on.
→ Turn the MCX-1000 on.
There are no songs which the
MCX-1000 has finished encoding to
MP3 format in the MCX-1000 library.
→ Wait until MP3 encoding is
complete.
Surroundings are interfering with
wireless network signals (for wireless
connections only).
→ Try using a different wireless
network channel, or use a wired
network connection.
There are skips or pauses during
playback from the MCX-A10.
Surroundings are interfering with
wireless network signals (for wireless
connections only).
→ Try using a different wireless
network channel, or use a wired
network connection.
The network is extremely congested
(for wired network connections).
Place your MusicCAST components
under a different subnet mask.
The MusicCAST server does not
appear to find the correct album,
or finds
no albums at all, when you
attempt to store an album.
The MCX-1000 is set not to access the
Gracenote CDDB.
→ Set the MCX-1000 to access the
Gracenote CDDB.
The MCX-1000 is only accessing its
internal Gracenote CDDB.
→ The built-in Gracenote CDDB
database on the MCX-1000 may not
contain data on some CDs. Set the
MCX-1000 to access the Gracenote
Gracenote CDDB via the Internet
(note: connect the MCX-1000 to the
Internet first).
The MCX-1000 cannot access the
Internet-based Gracenote CDDB
service even though it is set to do so.
→ Check the network settings.
The MCX-1000 does not display
the data it obtains from the
Gracenote CDDB correctly.
This happens occasionally when using
the Gracenote CDDB, particulary when
other languages are registered in the
database.
→ Edit the text manually.
The MCX-1000 does not appear
to complete MP3 encoding.
The MCX-1000 is distributing MP3
songs to MusicCAST clients and
playing back MP3 songs
simultaneously.
→ Stop one of these processes.
The MCX-1000 stops storing
songs prematurely.
The hard disk drive is full.
→ Delete any songs you do not need, or
delete PCM versions of songs.
The MCX-1000 is set to Synch.
Recording for signals from external
inputs.
→ Store songs manually.
You are unable to select some
songs for recording to the CD.
You are attempting to select songs for
which only MP3 files exist.
The MusicCAST server cannot record
MP3 files to CD.
You cannot enter the CD creation
or CD storing screens after
recording from an external
device.
The MCX-1000 is already recording
something other than the item you are
attempting to select.
→ Stop all other recording.
The MCX-1000 does not record
or playback from the analog input
jacks.
The analog level is set too low.
→ Use the level adjustment dial on the
front panel of the MCX-1000 to set
an appropriate recording level.
You cannot change from external
input to another playback option.
The MusicCAST is recording from an
external input.
→ Stop recording from an external
source.
Playback changes from the
external input for no apparent
reason.
Another operator is changing sources.
→ Stop the operator from changing
sources.
The MCX-1000 does not control
the AV receiver correctly.
You are using a “straight” type RS-
232C cable.
→ Use a “cross” RS-232C cable.
You have not set the MCX-1000 to
change AV receiver settings.
→ Set The MusicCAST server to
change AV receiver settings.
The AV receiver 6 channel input
parameter, is set to “ON”.
→ Set the AV receiver 6 channel setting
to “OFF”.
SYMPTOM
CAUSE
REMEDY
PAGE