Yamaha mcx-1000 - Manual (Page 113)

Configuring the MusicCAST networ
k
Configuring the MusicCAST network
113
Use this screen to manually enter the ID slof the MusicCAST clients you wish to connect to the MusicCAST
server. Refer to page 55 of the MCX-A10 owner’s manual for more information on how to check the ID of your
MusicCAST client.
Carry out the following procedure to enter a MusicCAST client ID:
1 Press TOP MENU.
The Top Menu appears on the on-screen display.
2 Use / to move the cursor to “System Setup”
and press SELECT.
The System Setup screen appears on the on-screen display.
3 Use / to move the cursor to “Network” and
press SELECT.
The Network screen appears on the on-screen display.
4 Use / to move the cursor to “Manual
Configuration” and press SELECT.
The Manual Configuration screen appears on the on-screen
display.
5 Use / / / to move the cursor to the
appropriate field, then use / to set the
parameter to the appropriate setting.
When you have set one field, use / / / to move the
cursor to the next field you want to set.
MusicCAST client ID manual configuration