beautypg.com

Rear panel, Getting started 13 rear panel – Yamaha mcx-1000 User Manual

Page 13

background image

Getting started

Getting started

13

Rear panel

1 VIDEO jacks

NOTE

The MusicCAST server does not record any video signal.
Video signals from the S VIDEO IN and VIDEO IN jacks are
passed directly to the S VIDEO OUT and VIDEO OUT jacks
respectively, and are not processed in the MusicCAST server at
all.

• S VIDEO IN jack
Connects to the S VIDEO output from your video component
using an S VIDEO cable.

• S VIDEO OUT jack
Connects to the S VIDEO input on your TV/monitor using an S
VIDEO cable.

• VIDEO IN jack
Connects to the VIDEO output from the video component.

• VIDEO OUT jack
Connects to the video input on your TV/monitor.

2 LAN terminal

• LINK indicator
Lights up when the MusicCAST server is connected to a local
area network.

• ACTIVE indicator
Lights up when the MusicCAST server is transmitting or
receiving data over a local area network.

3 Wireless LAN antenna

4 RS-232C terminal

Connects to the RS-232C terminal on your YAMAHA AV
receiver using an RS-232C cable to allow the MusicCAST
server to control certain functions on the AV receiver.

5 AUDIO jacks

• OPTICAL (digital) IN jack
Connects to the optical digital output jack on an external
component to receive signals from the component over a
digital optical connection.

• OPTICAL (digital) OUT jack
Connects to the optical digital input jack on an external
component to transmit signals to the component over a digital
optical connection.

• COAXIAL (digital) IN jack
Connects to the coaxial digital output jack on an external
component to receive signals from the component over a
digital coaxial connection.

• COAXIAL (digital) OUT jack
Connects to the coaxial digital input jack on an external
component to transmit signals to the component over a digital
coaxial connection.

• ANALOG IN jacks
Connects to the analog output jacks on an external component
to receive signals from the component over an analog
connection.

• ANALOG OUT jacks
Connects to the analog input jacks on an external component to
transmit signals to the component over to end of an analog
connection.

6 FAN

7 HDD slot

8 AC power cord

(U.S.A model)