Yamaha mcx-1000 - Manual (Page 114)

Configuring the MusicCAST network
114
6 When you have finished setting codes, use /
/ / to move the cursor to “OK” and press
SELECT to confirm the settings you have made
and exit the screen.
To exit the screen without making any changes move the cursor
to “Cancel” and press SELECT.
You should now set the following parameters on the
MusicCAST client
1 Server ID (for both wired and wireless connections).
2 ESSID (for wireless connections)
3 Wep key (for wireless connections) refer to the section on
configuring network settings in the MCX-A10 owner’s
manual for explanations on how to set these parameters.
HINT HINT
You can swap the assignment of IDs registered to MusicCAST
clients, regardless of whether you configure them manually or
use the Auto Configuration function to connect them to the
MusicCAST server.
Press SUB MENU while the Manual Configuration screen is
open. Use
/ / / to move the cursor to a movement
option and press SELECT.