ZyXEL Communications Prestige 1600 - Manual (Page 60)

Prestige 1600 Universal Access Concentrator
7-4 Remote Node Configuration
Table 7-2 Remote Node PPP Options Menu Fields
Field Description Option
Select the vendor-specific encapsulation for the link.
The default is Standard PPP. Select Cisco PPP only
when the remote gateway is a Cisco machine.
Standard PPP - Standard PPP encapsulation will be
used. Standard PPP
Encapsulation
CISCO PPP - Cisco PPP encapsulation will be used. CISCO PPP
Compression Turn on/off Stac data compression. The default for this
field is Off. On/Off
(Default = Off)
Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press
[ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press
[ESC] at any time to cancel.
7.4 Edit IP Parameters
Move the cursor to the Edit IP field in Menu 11.1 - Remote Node Profile, then press [SPACE BAR] to toggle the
value to Yes, and press [ENTER]
to edit Menu 11.3 - Network Layer Options.
Figure 7-4 Menu 11.3- Remote Node TCP/IP Options
Menu 11.3 Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= IGMP-v2
IP Policies=
Enter here to CONFIRM or ESC to CANCEL