ZyXEL Communications Prestige 1600 - Manual (Page 141)

Prestige 1600 Universal Access Concentrator
IP Policy Routing 16-7
Step 1. Create a routing policy set in Menu 25.
Step 2. Create a rule for this set in Menu 25.1 - IP Routing Policy as shown next.
Figure 16-7 IP Routing Policy Example
Step 3. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Step 4. Create another policy set in Menu 25.
Step 5. Create a rule this set in Menu 25.2 to route packets from any host (IP=0.0.0.0 means any host) with
protocol TCP and port FTP access through another gateway (192.168.1.100).
Figure 16-8 IP Policy Routing
Step 6. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Step 7. Apply both policy sets in Menu 3.2 as shown next.
Menu 25.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Packet length= 10
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 192.168.255.1
end= 192.168.255.32
port start= 0 end= N/A
Destination:
addr start= 0.0.0.0
end= N/A
port start= 80 end= 80
Action= Matched
Gateway addr = 192.168.1.1
Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 25.2 - IP Routing Policy
Policy Set Name= set2
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Packet length= 10
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 0.0.0.0
end= N/A
port start= 0 end= N/A
Destination:
addr start= 0.0.0.0
end= N/A
port start= 20 end= 21
Action= Matched
Gateway addr =192.168.1.100
Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.