ZyXEL Communications Prestige 1600 - Manual (Page 59)

Prestige 1600 Universal Access Concentrator
Remote Node Configuration 7-3
Field Description Options
defined.
Once you have completed filling in Menu 11.1.1 - Remote Node Profile, press [ENTER] at the
message “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to
cancel.
7.2 Outgoing Authentication Protocol
Generally speaking, you should employ the strongest authentication protocol possible, for obvious reasons.
However, some vendor’s implementation includes specific authentication protocol in the user profile. It will
disconnect if the negotiated protocol is different from that in the user profile, even when the negotiated protocol is
stronger than specified. If you encounter the case where the peer disconnects right after a successful authentication,
please make sure that you specify the correct authentication protocol when connecting to such an implementation.
Note: Generally, the authentication option is decided by the server hence, for outgoing calls it is not
necessary for you to configure this field except in cases where you are told by the remote server’s
operator.
7.3 Editing PPP Options
To edit the PPP options of a remote node, move the cursor to the Edit PPP Options field in Menu 11.1 - Remote
Node Profile, and press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.2, as shown.
Figure 7-3 Menu 11.2 - Remote Node PPP Options
Table 7-2 Remote Node PPP Options Menu Fields describes the Remote Node PPP Options Menu, and contains
instructions on how to configure the PPP options fields.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
ENTER here to Confirm or ESC to Cancel:
Press Space Bar to Toggle.