ZyXEL Communications Prestige 1600 - Manual (Page 35)

Prestige 1600 Universal Access Concentrator
Initial Setup 3-5
99 Exit To exit the SMT and return to a blank screen.
3.3.2 Secondary and Standalone Main Menu
The SMT Main Menu for the secondary and standalone Prestige models is as shown next.
Figure 3-4 Secondary and Standalone Main Menu
Note: You will see the above screen when you set Configuration Type in Menu 1- General Setup as
secondary or standalone.
3.4 Changing the System Password
The first thing you should do before anything else is to change the default system password by doing the following:
Step 1. Select option 23 from the Main Menu. This will open Menu 23 - System Security as shown:
Figure 3-5 Menu 23 - System Security
Step 2. From the System Security Menu, select Change Password to bring up Menu 23.1 - System Security -
Change Password.
Step 3. When submenu 23.1- System Security-Change Password appears, as shown below, enter the existing
system password, i.e.,
1234 , then press [ENTER].
Menu 23 - System Security
1. Change Password
2. External Server
Enter Menu Selection Number
Copyright (c) 2000 ZyXEL Communications Corp.
Prestige 1600 Main Menu (MySeconda)
Getting Started
1. General Setup
3. Ethernet Setup
6. Port Setup
Advanced Applications
12. Static Routing Setup
15. NAT Setup
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
25. IP Routing Policy Setup
99. Exit
Enter Menu Selection Number: