ZyXEL Communications Prestige 1600 - Manual (Page 101)

Prestige 1600 Universal Access Concentrator
SNMP Configuration 11-3
Figure 11-2 Menu 22 - SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 11-1 SNMP Configuration Menu Fields
Field Description Option
Get Community Enter the Get Community, which is the password for the
incoming Get- and GetNext- requests from the management
station. Public
Set Community Enter the set community, which is the password for
incoming Set requests from the management station. Public
Trusted Host If you enter a trusted host, your Prestige 1600 will only
respond to SNMP messages from this address. If you leave
the field blank (default), your Prestige 1600 will respond to
all SNMP messages it receives, regardless of source. Blank
Trap: Community Enter the trap community, which is the password sent with
each trap to the SNMP manager. Public
Trap: Destination Enter the IP address of the station to send your SNMP traps
to. Blank
Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the
message “Press ENTER to Confirm...” to save your configuration, or press [ESC] to cancel.
11.4 SNMP Traps
P1600 will send traps to the SNMP manager when any one of the following events occurs:
1. coldStart (defined in RFC-1215) :
When the machine coldstarts, a trap will be sent after booting (power on).
2. warmStart (defined in RFC-1215) :
When the machine warmstarts, a trap will be sent after booting (software reboot).
3. linkDown (defined in RFC-1215) :
When any of the links is down, a trap will be sent with the port number. The port number is its interface index under
the interface group.
Port 1 : Ethernet LAN
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Hgst= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: