ZyXEL Communications 128MH - Manual (Page 96)

Prestige 128MH PSTN Router/Hub
5-16 Chapter 5 Remote Node Configuration for LAN-to-LAN
Table 5-3. Remote Node Profile Menu Fields for Leased Line Applications (continued)
Field Description Option
Backup Line Call Direction When the Backup Line function is enabled and if all
links (WAN Ports) in a Leased Line Modem
connections drop, your Prestige will pick up an
available Dial-up WAN port to trigger a backup
connection. Press space bar
to toggle
[Both/None/Out
going/Incoming]
l If this parameter is set to [Both], your Prestige
can both place and receive calls to/from a
Remote Node.
[Both]
(default)
l Set this parameter to [None] to de-activate the
Backup Line function.
[None]
l If set to Incoming, your Prestige will not place a
call to a Remote Node.
[Incoming]
l If set to Outgoing, your Prestige will drop any call
from a Remote Node.
[Outgoing]
Device Type
(*for backup line only)
Use the space bar to choose the following selections:
Modem / ISDN TA / X.25 PAD / 56K Modem.
Your Prestige only picks up a free device of the
selected Device Type to dial up.
[Modem]
[ISDN TA]
[X25 PAD]
[56K Modem]
Pri(mary) Backup Phone #
(*for backup line only)
Enter the primary telephone number that your
Prestige will dial when the Backup Line function is
triggered.
Sec(ondary) Backup Phone #
(*for backup line only)
Enter the secondary telephone number that your
Prestige will dial when the Backup Line function is
triggered.