ZyXEL Communications 128MH - Manual (Page 41)

Prestige 128MH PSTN Router/Hub
2-11 Chapter 2 Hardware Installation & Initial Setup
Step 3. When the Submenu 23.1- System Security-Change Password appears, as shown in
Figure 2-6, type in your previous system password, then press [Enter].
Figure 2-6. Menu 23.1 - System Security - Change Password
Step 4. Enter your new system password and press [Enter].
Step 5. Re-type your new system password for confirmation and press [Enter].
You will now need to enter this password every time you attempt to access the SMT. In addition,
the password is required when a network administrator attempts to access your Prestige via a
Telnet connection.
Note on Password Display
As you type a password, the screen displays a (X) for each character you type.
Menu 23.1 - System Security - Change Password
Old Password= XXXX
New Password= XXXX
Retype to confirm= XXXX
Enter here to CONFIRM or ESC to CANCEL: