ZyXEL Communications 128MH - Manual (Page 121)

Prestige 128MH PSTN Router/Hub
8-3 Chapter 8 Bridge Configuration for LAN-to-LAN
From Menu 3 - Ethernet Setup, enter option [4. Bridge Setup] and Menu 3.5 - Bridge Ethernet
Setup displays as shown in Figure 8-1.
Figure 8-1. Menu 3.5 - Bridge Ethernet Setup
Table 8-2 describes how to configure the [Handle IPX] field in Menu 3.5.
Table 8-2. Bridge Ethernet Setup Menu - Handle IPX Field Configuration
Handle IPX Field
(Menu 3.5)
Description
None When there is no IPX traffic on the LAN or when you do not want to apply any
special handling for IPX.
Client When there are only client workstations on the LAN
Server When there are only IPX servers on the LAN.
Client + Dial-On-
Broadcast in Menu 12 set
to [Yes] When there are both clients and servers on the LAN, and the local clients will
access the remote servers, set to Client and the Menu 12 to [Yes] to allow the
client queries to trigger the call. If they do not, set it to [Server].
Menu 3.5 - Bridge Ethernet Setup
Handle IPX= None
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.