ZyXEL Communications 128MH - Manual (Page 39)

Prestige 128MH PSTN Router/Hub
2-9 Chapter 2 Hardware Installation & Initial Setup
The SMT displays the Main Menu, as shown in Figure 2-4.
Figure 2-4. SMT Main Menu
System Management Terminal Interface Summary
Table 2-3. Main Menu Summary
# Menu Title Description
1 General Setup Access this menu to setup general information and enable routing or
bridging of specific protocols.
2 WAN Setup Access this menu to setup WAN port configuration.
3 Ethernet Setup Access this menu to setup Ethernet configuration.
4 Internet Access Setup A quick and easy way to setup Internet connection.
11 Remote Node Setup Access this menu to setup the Remote Node for LAN-to-LAN connection,
including Internet connection. Prestige supports up to four Remote Nodes.
12 Static Routing Setup Access this menu to setup static route for different protocols. There are
four static routes for each protocol.
13 Default Dial-in Setup Access this menu to setup default dial-in parameters so that your Prestige
can be a dial-in server for the Remote Node and Remote Dial-in User.
14 Dial-in User Setup Setup Remote Dial-in User. Prestige has eight Remote Dial-in Users.
21 Filter Set Configuration Setup filters to be used in Menu 3 and Menu 11 to provide security, call
control, etc.
22 SNMP Configuration Access this menu to setup SNMP related parameters
23 System Security Access this menu to setup security related parameters.
24 System Maintenance Provides system status, diagnostics, firmware upload, etc.
99 Exit To exit from SMT and return to the blank screen.
Copyright (c) 1994 - 1997 ZyXEL Communications Corp.
Prestige 128MH Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. Ethernet Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
13. Default Dial-in Setup
14. Dial-in User Setup
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
99. Exit
Enter Menu Selection Number: