ZyXEL Communications 128MH - Manual (Page 117)

Prestige 128MH PSTN Router/Hub
7-9 Chapter 7 Novell IPX Configuration for LAN-to-LAN
7.5.2 Static Route Setup
If your LAN-to-LAN application has NetWare servers on both sides of the link, then all NetWare
client stations will have access to a server on their LAN as shown in Figure 7-5.
Figure 7-5. Netware Servers or Both Sides of the Link
This may present a problem if you desire your client station to access a server at a remote site. For
example, in the diagram of Figure 7-5, suppose that a client station on the network on the left
wishes to access the NetWare server on the right (internal network number = 111). However, the
SAP broadcasts will receive a response from the server on the left (internal network number =
444). A static route is used to resolve this problem by providing your Prestige with some static
routing information to access the remote server.
From Menu 12, select one of the four possible IPX Static Routes (no. 11-14), this will open Menu
12.2 - Edit IPX Static Route, as shown in Figure 7-6.
External Network
Number = 333
Server
Name =
Server_1
NetWare
Clients
Internal Network
Number = 111
External Network
Number = 222
Not Seed Routers
Prestige 128MH Prestige 128MH