beautypg.com

ZyXEL Communications 128MH User Manual

Page 125

background image

Prestige 128MH PSTN Router/Hub

8-7

Chapter 8 Bridge Configuration for LAN-to-LAN

The following Table 8-5 describes the Bridge Static Route Menu.

Table 8-5.

Bridge Static Route Menu Fields

Field

Description

Route Name

For identification purposes enter a name for the bridge static route.

Active

Indicates whether the static route is active or not.

Ether Address

Enter the MAC address of the destination device that you wish to bridge your packets
to.

IP Address

If available, enter the IP address of the destination device that you wish to bridge your
packets to.

Gateway Node

Enter the number (1-4) of the Remote Node that is linked to this static route. When an
incoming packet’ s destination Ether (MAC) address matches the value entered above,
then it will trigger a call to this Remote Node.

Once you have completed filling in this menu, press [Enter] at the message [Press Enter to Confirm] to
save your selections, or press [Esc] to cancel your selection.