ZyXEL Communications 128MH - Manual (Page 32)

Prestige 128MH PSTN Router/Hub
2-2 Chapter 2 Hardware Installation & Initial Setup
2.2 Additional Installation Requirements
In addition to the contents of your package, there are other hardware and software requirements
you need before you can install and use your Prestige. These requirements include:
l External Modems or ISDN TAs (Terminal adapters).
l An Ethernet 10Base-T connection to your computer.
l A computer equipped with communications software configured to the following parameters:
Ø VT100 terminal emulation.
Ø 9600 Baud rate.
Ø No parity, 8 Data bits, 1 Stop bit.
After the Prestige has been successfully connected to your network, you can make future changes
to the configuration by using a Telnet application.