ZyXEL Communications 128MH - Manual (Page 49)

Prestige 128MH PSTN Router/Hub
2-19 Chapter 2 Hardware Installation & Initial Setup
Refer to Table 2-6 for details on how to fill in the AT commands fields.
Table 2-6. Advanced WAN Port Setup AT Commands Fields
Field Description Default
AT Command Strings:
Dial
Drop
Answer
Enter the AT Command string to make a modem/ISDN TA
connection.
Enter the AT Command string to drop a modem/ISDN TA
connection. [~] represents a one second wait.
Enter the AT Command string to answer a phone call and make a
modem/ISDN TA connection.
[atd]
[~+++~ath]
[ata]
Drop DTR When Hang
Up When [Yes] is selected, your Prestige will drop the DTR signal
after sending out [AT Command String: Drop]. Toggle
[Yes/No]
(Default=[Yes])
AT Response Strings:
CLID (Caller Line
Identification)
Enter the keyword to capture Caller ID from the AT Response
String. Your Prestige will capture CLID from the AT Response
String, if they are available. The keyword just before CLID is
recognized first; then captures CLID. CLID is required for Prestige
callback function or CLID authentication. Not every modem
supports CLID. [NMBR]
Called ID Enter the keyword to capture Called ID from AT Response String. [TO]
Speed Enter the keyword to capture the Connection Speed from AT
Response String.
[CONNECT]
When you have completed this menu, press [Enter] to return to Menu 2.1.