ZyXEL Communications 128MH - Manual (Page 36)

Prestige 128MH PSTN Router/Hub
2-6 Chapter 2 Hardware Installation & Initial Setup
2.4 Power On Your Prestige
At this point, you should have connected the computer, the external modem or ISDN TA (WAN),
the telephone lines (LINE 1,2), the Ethernet cable, and the power supply. You can now power on
your Prestige by plugging the AC adapter to the appropriate power outlet.
Step 1. Initialize SMT
When you power on your Prestige, the Router/Hub will perform several internal tests and will
also perform a PSTN/ISDN line initialization. After this initialization, the Prestige will display
the SMT (System Management Terminal) interface and ask you to press [Enter] to continue, as
shown in Figure 2-2.
Figure 2-2. Power-On Display
Copyright (c) 1994 - 1997 ZyXEL Communications Corp.
ethernet address: 00:a0:c5:01:23:45
Wan port init ... done
Modem 0 init . inactive
Modem 1 init . inactive
Modem 2 init . inactive
Press ENTER to continue...