ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 87)

Handling Analog Calls (non-data) 75
Feature Phone (omni.net)
The omni.net supports ZyXEL’s powerful and advanced feature
phone operation. By connecting to the analog ports, you can get the
benefits of analog phone services, plus additional features over your
ISDN line.
The Flash key
All feature phone operations start from the Flash key. Commands
for feature phone operation are listed in the table below:
Commands Description
Press the Flash key. 1. Hold/Release.
2. Cancel the second dial connection attempt
Press the Flash key
and 0 (call waiting). 1. Answer the incoming call and place the
existing call on hold.
2. Switch back and forth between the two
calls; either two remote calls or one remote
call and one local call.
3. Place a call on hold to place a second call.
Press the Flash key
and 2 (Intercom and
Call Transfer). 1. Dial to another local phone.
2. Transfer the call to another local phone.
Press the Flash key
and 3 (Three-way
conference) Create three-way conference connection in
Mixing mode (1 remote party and 2 local
parties or 2 remote parties and 1 local party).
Press the Flash key
and 5 (Call Reject). 1.Reject the second incoming call.
2.Disconnect the current phone connection.
InterCom
With two phones connected, your TA can be used as an intercom.
Please follow the instructions below:
1. Pick up the telephone handset.
2. Press the Flash key and then press 2 on the phone keypad. The
other local phone will start to ring.