ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 134)

122 AT Command Set Reference
Command Options Function & Description Ref.
n=7 Assign the phone number ‘s’ for the
analog adapter, phone 2.
&ZI? Display the phone number (including
subaddress , if any) for various B
channel protocols.
&ZO? Display the &ZOn setting.
&ZOn=x Write own phone number (including
sub-address, if any). The number
specified will be used as the calling
party number whiling dialing. Value
for “n”
I = ISDN data
A= analog adapter, Phone 1
B= analog adapter, Phone 2
Extended "AT*" Command Set
Command Options Function & Description Ref.
*Dn n=0-39 Set default dial pointer at telephone
directory location n.
S29
*D0 * (See also S35.4 and S38.0)
*Gn Security function selection. S36.5-7
*G0 * Disable security function.
*G1 Enable type 1 security, with password
check (ZyXEL to ZyXEL only).
*G2 Enable type 1 security, with password
check and call back (ZyXEL to
ZyXEL only).
*G3 Enable type 2 security, with password
check.
*G4 Enable type 2 security, with password
check and call back.
*G5 Enable type 2 security, with password
check and call back, remote site enters
the call back number.