ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 145)

Status Registers and Result Codes 133
Command bit dec hex Function and description Ref.
S40= bit dec hex Bit mapped register. +000
1 2 2 No result code displayed in
answer mode. Q2
S41= bit dec hex Bit mapped register. +000
3 8 8 Enable CCITT signals 140 and
141 on EIA-232D interface.
5 32 20 DSR follows DCD and pulses
(see S44b4). &Sn
6 64 40 Force S0>=2. S0
S42= bit dec hex Bit mapped register. +000
3 8 8 Disable escape sequence code
in answer mode.
5 32 20 Disable Data/Voice button.
6 64 40 Disable result
code. Xn
S43= bit dec hex DTE Port 2 speed (bps)
configured by AT command.
+001
0 0 230400 *A0
1 1 * 115200 *A1
2 2 76800 *A2
3 3 57600 *A3
4 4 38400 *A4
5 5 19200 *A5
6 6 9600 *A6
7 7 2400 *A7
S44= bit dec hex Bit mapped register. +000
3 8 8 ATDSn initiates auto-dial of
the stored numbers
consecutively until connection
is made. DSn
4 16 10 DSR follows DTR (see also
S41.5). &S1