ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 144)

132 Status Registers and Result Codes
Command bit dec hex Function and description Ref.
1 2 2 Disable aborting from terminal
during modem handshaking.
4 16 10 When Data/Voice with is
pressed, TA will dial the default
number. *Dn
S29
7 128 60 Enable extended numerical
result codes from 50-71 when
an error corrected connection is
made. Use with ATV0 (see
result code table). V0
S23.6
S36= bit dec hex Bit mapped register. +000
5-7 *0 0 Disable security function. *G0
32 20 Enable type 1 security, with
password check (ZyXEL to
ZyXEL only). *G1
64 40 Enable type 1 security, with
password check and call-back
(ZyXEL to ZyXEL only). *G2
96 60 Enable type 2 security, with
password check. *G3
128 80 Enable type 2 security, with
password check and call-back. *G4
160 A0 Enable type 2 security, with
password check and call-back.
Remote site enters the call-back
number.
*G5
S38= bit dec hex Bit mapped register. +000
0 1 1 Repeatedly dialing default
number. *Dn S29
3 8 8 DCD on/off sequence follows
UNIX standard, DCD high
before connect message is sent,
DCD off after last DCE
response is sent. &C1
S21.4