ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 31)

Installing omni Internal Models 19
Attention: La fiche ISDN est destinée uniquement pour la connexion
sur une ligne RNIS. La connexion sur une ligne téléphonique
peut endommager votre adaptateur de terminal.
U Interface Model
If you have purchased the U-interface model, you can connect the
U-Interface directly to the wall jack.
In most cases, the ISDN jack installed by the phone company is a
RJ-11 jack (except in Canada, where RJ-45 jack will be installed),
and the U-Interface jack on the back of the omni is a RJ-45 jack. A
RJ-45 to RJ-45 (or RJ-11 to RJ-45, depends on your regional
distributor’s request) phone cable is included with your TA.
To connect your U-interface omni to your ISDN line complete the
steps below:
•
Connect the RJ-45 connector to the “ISDN U” jack on the omni.
•
Connect the other end of the RJ-45 cable (or RJ-11) to your wall
jack.
S/T Interface
If you have purchased the omni S/T model, you will need an NT-1
device to connect to the network.
To connect your U-interface omni to your ISDN line complete the
steps below:
•
Connect the RJ-45 connector to the “ISDN S/T” jack on the
omni.
•
Connect the other end of the RJ-45 cable (or RJ-11) to your
NT-1.