ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 155)

Status Registers and Result Codes 143
Command bit dec hex Function and description Ref.
32 20 Use Speech Bearer service
whenever possible for analog
adapter, Phone 1
6 0 * 0 Enable analog adapter to
accept global calls
64 40 Forbid the POTS port to accept
global calls.
7 0 * 0 Enable analog incoming calls.
128 80 Reject analog incoming calls.
S119= bit dec hex
0
0 * 0 Disable call-back function *GC
1 1 Enable call-back function
1 0 * 0 Disable point-to-point signaling
DDI function
2 2 Enable point-to-point signaling
DDI function
2 0 * 0 Disable point-to-multipoint
signaling DDI function
4 4 Enable point-to-multipoint
signaling DDI function
3 0 * 0 Inbound call ignored when no
MSN (EAZ) is matched
8 8 Inbound call accepted using
default protocol when no MSN
(EAZ) is matched
4 0 * 0 V.110 user rate = 19200 bps if
DTE speed greater than 19200
bps
16 10 V.110 user rate = 38400 bps if
DTE speed greater than 38400
bps
5 0 * 0 Enable normal MSN function &ZIn