ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 140)

128 Status Registers and Result Codes
Basic S-Registers "ATSn=x"
Command Function & Description Ref.
S0= Set the number of rings on which the TA will
answer. A 0 value disables auto-answer. +000
S1= Counts and stores number of rings from an
incoming call. +000
S2= Define escape code character, default <+> (43
dec.). +043
S3= Define ASCII Carriage Return. +013
S4= Define ASCII Line Feed. +010
S5= Define ASCII Backspace. +008
S7= Set duration, in number of seconds, TA waits
for a carrier. +060
S8= Set duration, in seconds, for pause (,) option in
Dial command and pause between command
re-executions for Repeat (>)command. +002
Extended S-Registers "ATSn=x"
Command bit dec hex Function and description Ref.
S15= bit dec hex Bit-mapped register. +130
0,1 0 0 Even parity.
1 1 Odd parity.
2 2 * No parity.
2 0 0 * 1 stop bit.
4 4 2 stop bits.
4,3 0 0 * 10 bit character length. *C0
8 8 11 bit. *C1
16 10 9 bit. *C2
24 18 8 bit. *C3
7-5 0 0 Profile 0 as active settings after
power ON. Z0
32 20 Profile 1 as active settings after
power ON. Z1