ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 29)

Installing omni Internal Models 17
settings will be handled by your operating system if it supports the
Plug and Play standard.
If your operating system does not support Plug and Play, a DOS
configuration utility has been included on the floppy disk that is
included with your omni. To configure your omni internal card using
the disk follow the steps below:
1. Insert the floppy disk in the appropriate drive.
2. From the C prompt type a: and press Enter.
3. From the A prompt type instlpnp and press Enter.
4. The following message will appear:
Would you like to create the default
directory?
Press Y to continue.
5. The following message will appear:
Do you want to modify the autoexec.bat file?
Press Y to continue.
6. Press Alt-Ctrl-Delete to reboot your system.
7. The following message will appear:
Do you want to reconfigure your ZyXEL PnP
card?
If you press N installation is complete.
If you press Y you will see the screen below: