ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 129)

AT Command Set Reference 117
Command Options Function & Description Ref.
UPX Download firmware to the Flash
EPROM using Xmodem protocol.
Vn Sets display type for Result Codes. S23.6
V0 Display result code in numeric
form. (See also S35.7 and the result
code table of 'ATXn').
V1 * Display result code in verbose
form.
Xn n=0-7
5 * Result code options, see the
Options Table. S23.3-5
Zn n=0-4 Reset TA and set power-on profile. S15.5-7
Zn Reset TA and load user profile n
(0-3).
Z4 Reset TA and load factory settings.
$ Basic command summary help.
Description of ATI3 Output:
The Link Status Report output appears as follows:
ZyXEL ISDN TA LINK STATUS REPORT
Connect DTE Speed :
Error Control Level :
Protocol Link Speed :
Octets Received : 0
Octets Sent : 0
Cause :
Cause Value : 0
HDLC FCS Error : 0
HDLC Receive Over-run : 0
HDLC Transmit Under-run : 0
Output Parameter Output Value Description