ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 133)

AT Command Set Reference 121
Command Options Function & Description Ref.
&V0 View current active settings.
&V1-4 View the (n-1)th user profile settings.
&V5 View factory default settings.
&V6 View analog adapter, Phone 1 setting
&V7 View analog adapter, Phone 2 setting
&Wn n=0-3 Write current settings to user profile
n in non-volatile RAM. (See also
S35.6)
&Z? Display all the phone numbers stored
in non-volatile RAM.
&Zn=s n=0-39 Write phone number/s to NVRAM at
location n (n=0-39) use AT*Dn or
ATS29=n to set the default dial
pointer.
&ZIn=s n=0-7
s=phone
number MSN setting. Assign the phone
number (including subaddress, if any)
for various B channel protocols. In
answer mode, these numbers will be
compared with the received
called_party_number and
called_party_subaddress information.
The call will be accepted using the
specific protocol if the assigned
number of this protocol matches with
the called_party_number.
n=0 Assign MSN ’s’, for X.75.
n=1 Assign MSN ’s’, for V.110.
n=2 Assign MSN ’s’, for V.120.
n=3 Assign MSN ’s’, for PPP, MPPP.
n=4 Assign MSN ’s’ for ISDN data,
protocol auto-detection.
n=6 Assign the phone number ‘s’ for
analog adapter, Phone 1.