ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 40)

28 ISDN Communication Basics
ATS83.7=1
To disable it, type:
ATS83.7=0
Dialing out for Analog Adapter Port 1 (omni.net
Internal)
Using the “B” command following the “ATD” will tell your TA to
automatically switch call to analog adapter, Phone 1, once dialing is
complete.
Type:
ATDB17146930762
O
NOTE
: You must have an analog modem connected to your analog port
before you issue this command.
Dialing out for Analog Adapter Port 1 (omni.net)
Using the “A” command following the “ATD” will tell your TA to
automatically switch call to analog adapter, Phone 1, once dialing is
complete.
Type:
ATDA17146930762
O
NOTE
: You must have an analog modem connected to your analog port
before you issue this command.
Dialing out for Analog Adapter Port 2 (omni.net)
Using the “B” command following the “ATD” will tell your TA to
automatically switch calls to analog adapter Phone 2, once dialing is
complete.
Type:
ATDB17146930762
O
NOTE
: You must have an analog modem connected to your analog port
before you issue this command.