ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 141)

Status Registers and Result Codes 129
Command bit dec hex Function and description Ref.
64 40 Profile 2 as active settings after
power ON. Z2
96 60 Profile 3 as active settings after
power on. Z3
128 80 * Factory default as active
settings after power ON.
Z4
S16= dec hex Test status register. +000
0 0 No test in progress. &T0
S18= dec Force modem or TA to fix baud
rate when idle. +000
0 * Disable fixed baud function
n+1 Enable baud rate fixing at idle,
n=0-15 baud rate value settings
(n) the same as S20 value.
S20= dec hex DTE speed (bps). Auto
detected from AT Command.
+003
0 0 230400 bps
1 1 115200 bps
3 3 57600 bps
4 4 38400 bps
5 5 19200 bps
9 9 9600 bps
11 B 4800 bps
12 C 2400 bps
13 D 1200 bps
14 E 460800 bps
15 F 921600 bps
S21= bit dec hex Bit mapped register.
1-2 0
0 Speaker always Off. M0
2 2 Speaker On until carrier is
detected. M1
4 4 Speaker always On. M2
3 0 0 DSR always On. &S0