beautypg.com

Installing omni internal models – ZyXEL Communications ACCESSING INTERNET & INTRANET omni series User Manual

Page 27

background image

Installing omni Internal Models 15

3

Installing omni Internal
Models

Although graphics are only displayed for the omni.net Internal, all
installation steps below apply to both the omni.net Internal and
omni.net Internal data ISDN Terminal Adapters unless specifically
noted.

Both cards have a built in high speed serial port that operates at
speeds up to 460800bps.

Selecting the Baud Rate Multiplier

The highest baud rate (COM port speed) that can be selected using
software is 115200 bps, far too slow for ISDN applications. The
omni.net internal card can be used to double or quadruple the speed
set by the software.

You can use the jumpers found on the card to change the COM port
speed. The jumper block is located near the lower right hand corner
of the card, near the finger connector.

Figure 3-4 Jumper Block Location