ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 143)

Status Registers and Result Codes 131
Command bit dec hex Function and description Ref.
128 80 TA does not return result code
(see S40b1). Q1
S24= bit dec hex Bit mapped register.
0-1 0-3 0-3 Ring volume control,
increments of 1 in decimal.
N0-3
2 0 0 Ignore S21.1-2 when Phone 1
key pad dialed.
4 4 Do not ignore S21-2 when
Phone 1 key pad dialed.
3 0 0 Ignore S21.1-2 when Phone 2
key pad dialed.
8 8 Do not ignore S21-2 when
Phone 2 key pad dialed.
4-5 16-
48
Speaker volume control, in
increments of 16 in decimal
value. L0-3
6 0 0 POTS Port tone volume low.
1 1 POTS Port tone volume high.
S27= bit dec hex Bit mapped register.
3-5 0
0 Flow control disabled. &H0
24 18 Hardware (RTS/CTS) flow
control. &H3
32 20 Software (XON/XOFF) flow
control. &H4
40 28 Reserved. &H5
S29= 0-
39 0-
39 Set default dial phone number
pointer, use AT&Zn=s to store
phone numbers. +000 *D
S31= 0-
255 0-
FF Holds the ASCII decimal value
of the XON. +017
S32= 0-
255 0-
FF Holds the ASCII decimal value
of the XOFF. +019
S35= bit dec hex Bit mapped register.