ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 156)

144 Status Registers and Result Codes
Command bit dec hex Function and description Ref.
32 20 Treat the number assigned by
&ZI=n... as sub-address, and
match with the
called_party_subaddress for
inbound call routing
S120= 0 *0 0 Enable POTS port 1 call out.
1 1 Disable POTS port 1 call out.
1 *0 0 Enable POTS port 2 call out.
2 2 Disable POTS port 2 call out.
2 *0 0 Enable multi-answering while
TA MSN is not assigned.
4 4 Handle incoming calls
according to AT&Ln setting.
3 *0 0 If S120.2=1 is set and the
POTS port is busy, calls will be
routed to another POTS port.
8 8 If S120.2=1 is set and the
POTS port is busy, calls will be
rejected.
4 *0 0 Enable TA to accept global
calls for a/b adapter and ISDN
data.
16 10 Reject unmatched calls for a/b
adapter and ISDN data.
S124= dec hex Empty IP packet interval for
PPP
+000
0-
255 0-
FF Units of 1 sec.
S125= bit dec hex
1-6
*0 Sub-persist time interval. KSxn
7 0 *0 S125b1-6 is in Second unit. KSSn
128 80 S125b1-6 is in Minute unit. KSMn
S126= 0-
255 0-
FF Add-threshold for BOD in
Kbps unit JAn,+48