ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 102)

90 Advanced ISDN Call Control
•
N0 - unknown (default if Nn is omitted).
•
N1 - ISDN numbering plan (Rec. E.164).
•
N3 - data numbering plan (Rec. X.121).
•
N4 - telex numbering plan (Rec. F.69).
•
N8 - national standard numbering plan.
•
N9 - private numbering plan.
Zn specifies the type of the Subaddress:
•
Z0 - NSAP (Rec. X.213) with AFI=0x50, IA5 characters
(default if Zn is omitted).
•
Z2 - user specified, IA5 characters.
The called_party_number or an appropriate part of it, will be sent
to the addressed entity. The called_party_subaddress will be
transferred transparently by the ISDN network to the destination.
Use ATDL to redial the last dialed telephone number (and/or
subaddress).
Placing a call for 1TR6
The ATDx[Yn][Nn]destination_address command is used for
dialing as follows.
x = I (ISDN data), A (the analog adapter 1), or B (the analog adapter
2).
Yn specifies the type of address:
•
Y0 - unknown (default if Yn is omitted).
•
Y1 - international number.
•
Y2 - national number.
Nn is the identifier of numbering/addressing plan:
•
N0 - unknown (default if Nn is omitted).