ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 84)

72 Handling Analog Calls (non-data)
AT Command Description
ATS84.5=1 use.
AT&ZIn=s MSN setting, assign Called phone number, “s,”
to be answered by “n” port (where n=6 for Phone
1 and n=7 for Phone 2).
AT&ZI6=s Assign the Called phone number for analog
adapter, Phone 1.
AT&ZI7=s Assign the Called phone number for analog
adapter, Phone 2.
ATS56=n Flash timer, in 100 ms unit, to set maximum
duration of ON-OFF hook transition to be
recognized as “Flash”.
European switch specific
ATS89.6=0 To disable the metering pulse for analog adapter,
Phone 1.
ATS89.6=1 To enable the metering pulse for analog adapter,
Phone 1.
ATS89.5=0 To disable the metering pulse for analog adapter,
Phone 2.
ATS89.5=1 To enable the metering pulse for analog adapter,
Phone 2.
Placing a Call from the Analog Adapter
Making a call from the analog adapter is as easy as picking up the
telephone connected to the analog port and dialing. With a terminal
program’s assistance you can also use the TA to dial the number for
you.
Type:
ATDB714-693-0808 (Dial the number)
TA responds:
CONNECT (Dialing is complete)
Now, just pick up the phone handset and wait for the remote device
to answer.